Installing a Brick Paver Walkway or Brick Crusher Machine

The use of Bricks or Pavers to develop a pathway or outdoor patio complements a house in a method that is unrivaled. In addition, setting up a Brick or Paver pathway does not necessarily need a pro.

The key to setting up a Brick or Paver Walkway is to first properly prepare the location where the bricks/pavers are to be installed. In addition, string lines should be strung on each side of the sidewalk.
Once the location has been dug down, 3/4" gravel stone must be laid in and tamped down tightly. The height in between the tamped down sand and the stringline should equate to the density of the brick or paver.

Now that you have a stable base, position a 1" pipe or journal board the length of the walkway on either side of the pathway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared location. These strips will act as your pathway border and aid to maintain the integrity and shape of the sidewalk. You can get these plastic strip borders at most home enhancement shops. The strips ought to be anchored down with 12" galvinized nails. You must sink these nails into the ground and through the strips every foot.

As soon as this is done, you can then begin to lay the bricks/pavers. There are numerous patterns you can lay. I especially like the Herring Bone pattern. The secret to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will once again assist keep the integrity of the walkway.

Inevitably bricks/pavers will require to be cut or divided when developing the pathway. To in fact cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the spot where you desire to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.

After installing the bricks, build up the outside edges with extra sand, and then shovel in the topsoil and pack down firmly.
Lastly, spread stone dust over the brand-new walkway and sweep into the fractures. Repeat this process a number of times to guarantee the cracks are totally filled. This will finish the interlocking of the bricks and help to remove any weed development. Simply include yard seed to the outside edges and you need to have a lovely entryway to your house within a couple of weeks.


In addition, installing a Brick or Paver sidewalk does not necessarily need a pro. brick packaging machines The key to setting up a Brick or Paver Walkway is to first correctly prepare the area where the bricks/pavers are to be set up. Now that you have a steady base, place a 1" pipeline or journal board the length of the sidewalk on either side of the sidewalk. These strips will act as your walkway border and assistance to keep the integrity and shape of the pathway. Undoubtedly bricks/pavers will need to be cut or split when constructing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *